How to Use Split Braided Wire Loom

Using split braided wire loom is a straight forward process and is commonly used to protect and organize wires, cables, and hoses. Here's a step-by-step guide on how to use split braided wire loom:

1.Gather Your Materials: Make sure you have the necessary materials, including the split braided wire loom and the wires, cables, or hoses you want to protect and bundle.

2.Measure and Cut: Measure the length of the wires or cables you want to cover. Then, using scissors or a utility knife, cut the split braided wire loom to the required length. Be sure to cut the loom slightly longer than the wires to ensure complete coverage.

3.Open the Split: Split cable sleeve has a longitudinal opening along its entire length. Gently pull the opening apart to reveal the inner cavity. Be careful not to pull too hard, as this can cause the loom to fray.

4.Insert the Wires: Insert the wires or cables into the split opening of the wire loom. If you have multiple wires or cables, you can group them together inside the loom to keep them organized.

5.Feed the Wires Through: Gradually push the wires through the loom, ensuring that they remain centered within the cavity. If the loom is too tight, you may need to use a gentle wiggling motion to help guide the wires through.

6.Secure the Ends: Once the wires are fully enclosed within the split braided wire loom, you can secure the ends to prevent them from sliding out. You can use cable ties, heat shrink tubing, or tape to secure the ends of the loom. Alternatively, some split braided wire looms come with self-closing features that snap shut.

7.Organize and Route the Wires: Arrange and route the wires or cables in the desired manner, taking advantage of the split braided wire loom's protective and organizing capabilities.

8.Trim Excess: If you have extra length of the split braided wire loom after covering the wires, you can trim it with scissors or a utility knife for a neater appearance.

And that's it! You've successfully used split sleeving to protect and organize your wires or cables. Remember that split braided wire loom is reusable, so if you need to make changes or add more wires in the future, you can simply open the loom, adjust the contents, and close it again.