Dual wall heat shrink tubing with igher shrinkage, thicker double walls, better quality liner glue, higher flame retardancy, and less restrictive range of use,ideal for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.

PE heat shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components

MJ 2:1 shrink ratio fabric heat shrink tubing are abrasion resistant,noise reduction,which use to cover rubber hoses, plastic pipes and harnesses.

Thin wall heat shrink tubes are much thinner than standard wall heat shrink, with lower shrink temperature and faster-shrinking speed. It is ideal for connector protection in high-density spaces and reduces the damage to temperature-sensitive components when heating.

4:1 dual wall heat shrink tubing with igher shrinkage, thicker double walls, better quality liner glue, higher flame retardancy, and less restrictive range of use,ideal for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.

Nylon Electrical Braided Wire Sheathing is commonly used in the automotive industry to protect wires and hoses from excessive wear. Vibration and abrasion can tear automotive hoses to pieces, but nylon electrical wire sheathing can increase hose life up to 300%. This lengthened lifespan is recognized in terms of reduced maintenance and downtime, an attractive and professional appearance and greater customer satisfaction. With the protection that this MJ nylon wire harness sheathing, it pays for itself throughout the life of your product.

MJ hydraulic hose sheathing made of HDPP(high density polypropylene),can withstand the extremes of climate and operating conditions. Is an economical and convenient way to protecting and extending the life of hydraulic and pneumatic hoses, cables, wires and rope from premature wear.

Fire protection sleeving is an industrial grade, high temperature insulating sleeving constructed from thick-wall fiberglass fiber and coated with high temperature silicone elastomer containing an inorganic Red Oxide additive. The heavy silicone coating sheds molten metal splash to prevent heat transfer. It widely used to protect wires, cables and hoses from high ambient temperatures.

Single wall heat shrink tube is composed of cross-linked polyolefin.and it is very flexible, 

Aluminum foil coated fiberglass sleeve special designed by laminating an aluminized metallic heat shield to a layer of strong and tight braided fiberglass yarn. A special manufacturing process permits the sleeve to boast a virtually seamless and non fraying construction. This aluminized fiberglass sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.

PTFE heat shrink tubing is an excellent choice for applications  requiring the highest level of lubricity available,and is an excellent  choice for catheter fusing sleeves and printer roller covers.   It is available in a variety of sizes, dimensions, and shrink ratios and made to ensure that products subjected to extreme heat, corrosion, shock, moisture, and other critical conditions are perfectly protected and ready to perform. 

PVDF Heat shrink tubing made of special irradiation cross-linked medical-grade fluoropolymer with outstanding chemical and solvent resistance and high-temperature performance. It is especially suitable for medical applications requiring high-temperature performance and fluid resistance.